/AWS1/CL_MDLH264SETTINGS¶
H264 Settings
CONSTRUCTOR¶
IMPORTING¶
Optional arguments:¶
iv_adaptivequantization TYPE /AWS1/MDLH264ADAPTIVEQUANTIZ00 /AWS1/MDLH264ADAPTIVEQUANTIZ00¶
Enables or disables adaptive quantization (AQ), which is a technique MediaLive can apply to video on a frame-by-frame basis to produce more compression without losing quality. There are three types of adaptive quantization: spatial, temporal, and flicker. We recommend that you set the field to Auto. For more information about all the options, see the topic about video adaptive quantization in the MediaLive user guide.
iv_afdsignaling TYPE /AWS1/MDLAFDSIGNALING /AWS1/MDLAFDSIGNALING¶
Indicates that AFD values will be written into the output stream. If afdSignaling is "auto", the system will try to preserve the input AFD value (in cases where multiple AFD values are valid). If set to "fixed", the AFD value will be the value configured in the fixedAfd parameter.
iv_bitrate TYPE /AWS1/MDL__INTEGERMIN1000 /AWS1/MDL__INTEGERMIN1000¶
Average bitrate in bits/second. Required when the rate control mode is VBR or CBR. Not used for QVBR. In an MS Smooth output group, each output must have a unique value when its bitrate is rounded down to the nearest multiple of 1000.
iv_buffillpct TYPE /AWS1/MDL__INTEGERMIN0MAX100 /AWS1/MDL__INTEGERMIN0MAX100¶
Percentage of the buffer that should initially be filled (HRD buffer model).
iv_bufsize TYPE /AWS1/MDL__INTEGERMIN0 /AWS1/MDL__INTEGERMIN0¶
Size of buffer (HRD buffer model) in bits.
iv_colormetadata TYPE /AWS1/MDLH264COLORMETADATA /AWS1/MDLH264COLORMETADATA¶
Includes colorspace metadata in the output.
io_colorspacesettings TYPE REF TO /AWS1/CL_MDLH264COLORSPACESTGS /AWS1/CL_MDLH264COLORSPACESTGS¶
Specify the type of color space to apply or choose to pass through. The default is to pass through the color space that is in the source.
iv_entropyencoding TYPE /AWS1/MDLH264ENTROPYENCODING /AWS1/MDLH264ENTROPYENCODING¶
Entropy encoding mode. Use cabac (must be in Main or High profile) or cavlc.
io_filtersettings TYPE REF TO /AWS1/CL_MDLH264FILTERSETTINGS /AWS1/CL_MDLH264FILTERSETTINGS¶
Optional. Both filters reduce bandwidth by removing imperceptible details. You can enable one of the filters. We recommend that you try both filters and observe the results to decide which one to use.
The Temporal Filter reduces bandwidth by removing imperceptible details in the content. It combines perceptual filtering and motion compensated temporal filtering (MCTF). It operates independently of the compression level.
The Bandwidth Reduction filter is a perceptual filter located within the encoding loop. It adapts to the current compression level to filter imperceptible signals. This filter works only when the resolution is 1080p or lower.
iv_fixedafd TYPE /AWS1/MDLFIXEDAFD /AWS1/MDLFIXEDAFD¶
Four bit AFD value to write on all frames of video in the output stream. Only valid when afdSignaling is set to 'Fixed'.
iv_flickeraq TYPE /AWS1/MDLH264FLICKERAQ /AWS1/MDLH264FLICKERAQ¶
Flicker AQ makes adjustments within each frame to reduce flicker or 'pop' on I-frames. The value to enter in this field depends on the value in the Adaptive quantization field. For more information, see the topic about video adaptive quantization in the MediaLive user guide.
iv_forcefieldpictures TYPE /AWS1/MDLH264FORCEFIELDPICTU00 /AWS1/MDLH264FORCEFIELDPICTU00¶
This setting applies only when scan type is "interlaced." It controls whether coding is performed on a field basis or on a frame basis. (When the video is progressive, the coding is always performed on a frame basis.) enabled: Force MediaLive to code on a field basis, so that odd and even sets of fields are coded separately. disabled: Code the two sets of fields separately (on a field basis) or together (on a frame basis using PAFF), depending on what is most appropriate for the content.
iv_frameratecontrol TYPE /AWS1/MDLH264FRAMERATECONTROL /AWS1/MDLH264FRAMERATECONTROL¶
This field indicates how the output video frame rate is specified. If "specified" is selected then the output video frame rate is determined by framerateNumerator and framerateDenominator, else if "initializeFromSource" is selected then the output video frame rate will be set equal to the input video frame rate of the first input.
iv_frameratedenominator TYPE /AWS1/MDL__INTEGERMIN1 /AWS1/MDL__INTEGERMIN1¶
Framerate denominator.
iv_frameratenumerator TYPE /AWS1/MDL__INTEGERMIN1 /AWS1/MDL__INTEGERMIN1¶
Framerate numerator - framerate is a fraction, e.g. 24000 / 1001 = 23.976 fps.
iv_gopbreference TYPE /AWS1/MDLH264GOPBREFERENCE /AWS1/MDLH264GOPBREFERENCE¶
Documentation update needed
iv_gopclosedcadence TYPE /AWS1/MDL__INTEGERMIN0 /AWS1/MDL__INTEGERMIN0¶
Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
iv_gopnumbframes TYPE /AWS1/MDL__INTEGERMIN0MAX7 /AWS1/MDL__INTEGERMIN0MAX7¶
Number of B-frames between reference frames.
iv_gopsize TYPE /AWS1/RT_DOUBLE_AS_STRING /AWS1/RT_DOUBLE_AS_STRING¶
GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits. If gopSizeUnits is frames, gopSize must be an integer and must be greater than or equal to 1. If gopSizeUnits is seconds, gopSize must be greater than 0, but need not be an integer.
iv_gopsizeunits TYPE /AWS1/MDLH264GOPSIZEUNITS /AWS1/MDLH264GOPSIZEUNITS¶
Indicates if the gopSize is specified in frames or seconds. If seconds the system will convert the gopSize into a frame count at run time.
iv_level TYPE /AWS1/MDLH264LEVEL /AWS1/MDLH264LEVEL¶
H.264 Level.
iv_lookaheadratecontrol TYPE /AWS1/MDLH264LOOKAHEADRATECTL /AWS1/MDLH264LOOKAHEADRATECTL¶
Amount of lookahead. A value of low can decrease latency and memory usage, while high can produce better quality for certain content.
iv_maxbitrate TYPE /AWS1/MDL__INTEGERMIN1000 /AWS1/MDL__INTEGERMIN1000¶
For QVBR: See the tooltip for Quality level
For VBR: Set the maximum bitrate in order to accommodate expected spikes in the complexity of the video.
iv_miniinterval TYPE /AWS1/MDL__INTEGERMIN0MAX30 /AWS1/MDL__INTEGERMIN0MAX30¶
Only meaningful if sceneChangeDetect is set to enabled. Defaults to 5 if multiplex rate control is used. Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
iv_numrefframes TYPE /AWS1/MDL__INTEGERMIN1MAX6 /AWS1/MDL__INTEGERMIN1MAX6¶
Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
iv_parcontrol TYPE /AWS1/MDLH264PARCONTROL /AWS1/MDLH264PARCONTROL¶
This field indicates how the output pixel aspect ratio is specified. If "specified" is selected then the output video pixel aspect ratio is determined by parNumerator and parDenominator, else if "initializeFromSource" is selected then the output pixsel aspect ratio will be set equal to the input video pixel aspect ratio of the first input.
iv_pardenominator TYPE /AWS1/MDL__INTEGERMIN1 /AWS1/MDL__INTEGERMIN1¶
Pixel Aspect Ratio denominator.
iv_parnumerator TYPE /AWS1/MDL__INTEGERMIN1 /AWS1/MDL__INTEGERMIN1¶
Pixel Aspect Ratio numerator.
iv_profile TYPE /AWS1/MDLH264PROFILE /AWS1/MDLH264PROFILE¶
H.264 Profile.
iv_qualitylevel TYPE /AWS1/MDLH264QUALITYLEVEL /AWS1/MDLH264QUALITYLEVEL¶
Leave as STANDARD_QUALITY or choose a different value (which might result in additional costs to run the channel). - ENHANCED_QUALITY: Produces a slightly better video quality without an increase in the bitrate. Has an effect only when the Rate control mode is QVBR or CBR. If this channel is in a MediaLive multiplex, the value must be ENHANCED_QUALITY. - STANDARD_QUALITY: Valid for any Rate control mode.
iv_qvbrqualitylevel TYPE /AWS1/MDL__INTEGERMIN1MAX10 /AWS1/MDL__INTEGERMIN1MAX10¶
Controls the target quality for the video encode. Applies only when the rate control mode is QVBR. You can set a target quality or you can let MediaLive determine the best quality. To set a target quality, enter values in the QVBR quality level field and the Max bitrate field. Enter values that suit your most important viewing devices. Recommended values are: - Primary screen: Quality level: 8 to 10. Max bitrate: 4M - PC or tablet: Quality level: 7. Max bitrate: 1.5M to 3M - Smartphone: Quality level: 6. Max bitrate: 1M to 1.5M To let MediaLive decide, leave the QVBR quality level field empty, and in Max bitrate enter the maximum rate you want in the video. For more information, see the section called "Video - rate control mode" in the MediaLive user guide
iv_ratecontrolmode TYPE /AWS1/MDLH264RATECONTROLMODE /AWS1/MDLH264RATECONTROLMODE¶
Rate control mode.
QVBR: Quality will match the specified quality level except when it is constrained by the maximum bitrate. Recommended if you or your viewers pay for bandwidth.
VBR: Quality and bitrate vary, depending on the video complexity. Recommended instead of QVBR if you want to maintain a specific average bitrate over the duration of the channel.
CBR: Quality varies, depending on the video complexity. Recommended only if you distribute your assets to devices that cannot handle variable bitrates.
Multiplex: This rate control mode is only supported (and is required) when the video is being delivered to a MediaLive Multiplex in which case the rate control configuration is controlled by the properties within the Multiplex Program.
iv_scantype TYPE /AWS1/MDLH264SCANTYPE /AWS1/MDLH264SCANTYPE¶
Sets the scan type of the output to progressive or top-field-first interlaced.
iv_scenechangedetect TYPE /AWS1/MDLH264SCENECHANGEDETECT /AWS1/MDLH264SCENECHANGEDETECT¶
Scene change detection.
- On: inserts I-frames when scene change is detected.
- Off: does not force an I-frame when scene change is detected.
iv_slices TYPE /AWS1/MDL__INTEGERMIN1MAX32 /AWS1/MDL__INTEGERMIN1MAX32¶
Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures. This field is optional; when no value is specified the encoder will choose the number of slices based on encode resolution.
iv_softness TYPE /AWS1/MDL__INTEGERMIN0MAX128 /AWS1/MDL__INTEGERMIN0MAX128¶
Softness. Selects quantizer matrix, larger values reduce high-frequency content in the encoded image. If not set to zero, must be greater than 15.
iv_spatialaq TYPE /AWS1/MDLH264SPATIALAQ /AWS1/MDLH264SPATIALAQ¶
Spatial AQ makes adjustments within each frame based on spatial variation of content complexity. The value to enter in this field depends on the value in the Adaptive quantization field. For more information, see the topic about video adaptive quantization in the MediaLive user guide.
iv_subgoplength TYPE /AWS1/MDLH264SUBGOPLENGTH /AWS1/MDLH264SUBGOPLENGTH¶
If set to fixed, use gopNumBFrames B-frames per sub-GOP. If set to dynamic, optimize the number of B-frames used for each sub-GOP to improve visual quality.
iv_syntax TYPE /AWS1/MDLH264SYNTAX /AWS1/MDLH264SYNTAX¶
Produces a bitstream compliant with SMPTE RP-2027.
iv_temporalaq TYPE /AWS1/MDLH264TEMPORALAQ /AWS1/MDLH264TEMPORALAQ¶
Temporal makes adjustments within each frame based on variations in content complexity over time. The value to enter in this field depends on the value in the Adaptive quantization field. For more information, see the topic about video adaptive quantization in the MediaLive user guide.
iv_timecodeinsertion TYPE /AWS1/MDLH264TIMECODEINSIONBEH /AWS1/MDLH264TIMECODEINSIONBEH¶
Determines how timecodes should be inserted into the video elementary stream. - 'disabled': Do not include timecodes - 'picTimingSei': Pass through picture timing SEI messages from the source specified in Timecode Config
io_timecodeburninsettings TYPE REF TO /AWS1/CL_MDLTIMECODEBURNINSTGS /AWS1/CL_MDLTIMECODEBURNINSTGS¶
Timecode burn-in settings
iv_minqp TYPE /AWS1/MDL__INTEGERMIN1MAX51 /AWS1/MDL__INTEGERMIN1MAX51¶
Sets the minimum QP. If you aren't familiar with quantization adjustment, leave the field empty. MediaLive will apply an appropriate value.
iv_minbitrate TYPE /AWS1/MDL__INTEGERMIN0 /AWS1/MDL__INTEGERMIN0¶
Used for QVBR rate control mode only. Optional. Enter a minimum bitrate if you want to keep the output bitrate about a threshold, in order to prevent the downstream system from de-allocating network bandwidth for this output.
Queryable Attributes¶
AdaptiveQuantization¶
Enables or disables adaptive quantization (AQ), which is a technique MediaLive can apply to video on a frame-by-frame basis to produce more compression without losing quality. There are three types of adaptive quantization: spatial, temporal, and flicker. We recommend that you set the field to Auto. For more information about all the options, see the topic about video adaptive quantization in the MediaLive user guide.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_ADAPTIVEQUANTIZATION() |
Getter for ADAPTIVEQUANTIZATION, with configurable default |
ASK_ADAPTIVEQUANTIZATION() |
Getter for ADAPTIVEQUANTIZATION w/ exceptions if field has n |
HAS_ADAPTIVEQUANTIZATION() |
Determine if ADAPTIVEQUANTIZATION has a value |
AfdSignaling¶
Indicates that AFD values will be written into the output stream. If afdSignaling is "auto", the system will try to preserve the input AFD value (in cases where multiple AFD values are valid). If set to "fixed", the AFD value will be the value configured in the fixedAfd parameter.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_AFDSIGNALING() |
Getter for AFDSIGNALING, with configurable default |
ASK_AFDSIGNALING() |
Getter for AFDSIGNALING w/ exceptions if field has no value |
HAS_AFDSIGNALING() |
Determine if AFDSIGNALING has a value |
Bitrate¶
Average bitrate in bits/second. Required when the rate control mode is VBR or CBR. Not used for QVBR. In an MS Smooth output group, each output must have a unique value when its bitrate is rounded down to the nearest multiple of 1000.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_BITRATE() |
Getter for BITRATE, with configurable default |
ASK_BITRATE() |
Getter for BITRATE w/ exceptions if field has no value |
HAS_BITRATE() |
Determine if BITRATE has a value |
BufFillPct¶
Percentage of the buffer that should initially be filled (HRD buffer model).
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_BUFFILLPCT() |
Getter for BUFFILLPCT, with configurable default |
ASK_BUFFILLPCT() |
Getter for BUFFILLPCT w/ exceptions if field has no value |
HAS_BUFFILLPCT() |
Determine if BUFFILLPCT has a value |
BufSize¶
Size of buffer (HRD buffer model) in bits.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_BUFSIZE() |
Getter for BUFSIZE, with configurable default |
ASK_BUFSIZE() |
Getter for BUFSIZE w/ exceptions if field has no value |
HAS_BUFSIZE() |
Determine if BUFSIZE has a value |
ColorMetadata¶
Includes colorspace metadata in the output.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_COLORMETADATA() |
Getter for COLORMETADATA, with configurable default |
ASK_COLORMETADATA() |
Getter for COLORMETADATA w/ exceptions if field has no value |
HAS_COLORMETADATA() |
Determine if COLORMETADATA has a value |
ColorSpaceSettings¶
Specify the type of color space to apply or choose to pass through. The default is to pass through the color space that is in the source.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_COLORSPACESETTINGS() |
Getter for COLORSPACESETTINGS |
EntropyEncoding¶
Entropy encoding mode. Use cabac (must be in Main or High profile) or cavlc.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_ENTROPYENCODING() |
Getter for ENTROPYENCODING, with configurable default |
ASK_ENTROPYENCODING() |
Getter for ENTROPYENCODING w/ exceptions if field has no val |
HAS_ENTROPYENCODING() |
Determine if ENTROPYENCODING has a value |
FilterSettings¶
Optional. Both filters reduce bandwidth by removing imperceptible details. You can enable one of the filters. We recommend that you try both filters and observe the results to decide which one to use.
The Temporal Filter reduces bandwidth by removing imperceptible details in the content. It combines perceptual filtering and motion compensated temporal filtering (MCTF). It operates independently of the compression level.
The Bandwidth Reduction filter is a perceptual filter located within the encoding loop. It adapts to the current compression level to filter imperceptible signals. This filter works only when the resolution is 1080p or lower.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_FILTERSETTINGS() |
Getter for FILTERSETTINGS |
FixedAfd¶
Four bit AFD value to write on all frames of video in the output stream. Only valid when afdSignaling is set to 'Fixed'.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_FIXEDAFD() |
Getter for FIXEDAFD, with configurable default |
ASK_FIXEDAFD() |
Getter for FIXEDAFD w/ exceptions if field has no value |
HAS_FIXEDAFD() |
Determine if FIXEDAFD has a value |
FlickerAq¶
Flicker AQ makes adjustments within each frame to reduce flicker or 'pop' on I-frames. The value to enter in this field depends on the value in the Adaptive quantization field. For more information, see the topic about video adaptive quantization in the MediaLive user guide.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_FLICKERAQ() |
Getter for FLICKERAQ, with configurable default |
ASK_FLICKERAQ() |
Getter for FLICKERAQ w/ exceptions if field has no value |
HAS_FLICKERAQ() |
Determine if FLICKERAQ has a value |
ForceFieldPictures¶
This setting applies only when scan type is "interlaced." It controls whether coding is performed on a field basis or on a frame basis. (When the video is progressive, the coding is always performed on a frame basis.) enabled: Force MediaLive to code on a field basis, so that odd and even sets of fields are coded separately. disabled: Code the two sets of fields separately (on a field basis) or together (on a frame basis using PAFF), depending on what is most appropriate for the content.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_FORCEFIELDPICTURES() |
Getter for FORCEFIELDPICTURES, with configurable default |
ASK_FORCEFIELDPICTURES() |
Getter for FORCEFIELDPICTURES w/ exceptions if field has no |
HAS_FORCEFIELDPICTURES() |
Determine if FORCEFIELDPICTURES has a value |
FramerateControl¶
This field indicates how the output video frame rate is specified. If "specified" is selected then the output video frame rate is determined by framerateNumerator and framerateDenominator, else if "initializeFromSource" is selected then the output video frame rate will be set equal to the input video frame rate of the first input.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_FRAMERATECONTROL() |
Getter for FRAMERATECONTROL, with configurable default |
ASK_FRAMERATECONTROL() |
Getter for FRAMERATECONTROL w/ exceptions if field has no va |
HAS_FRAMERATECONTROL() |
Determine if FRAMERATECONTROL has a value |
FramerateDenominator¶
Framerate denominator.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_FRAMERATEDENOMINATOR() |
Getter for FRAMERATEDENOMINATOR, with configurable default |
ASK_FRAMERATEDENOMINATOR() |
Getter for FRAMERATEDENOMINATOR w/ exceptions if field has n |
HAS_FRAMERATEDENOMINATOR() |
Determine if FRAMERATEDENOMINATOR has a value |
FramerateNumerator¶
Framerate numerator - framerate is a fraction, e.g. 24000 / 1001 = 23.976 fps.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_FRAMERATENUMERATOR() |
Getter for FRAMERATENUMERATOR, with configurable default |
ASK_FRAMERATENUMERATOR() |
Getter for FRAMERATENUMERATOR w/ exceptions if field has no |
HAS_FRAMERATENUMERATOR() |
Determine if FRAMERATENUMERATOR has a value |
GopBReference¶
Documentation update needed
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_GOPBREFERENCE() |
Getter for GOPBREFERENCE, with configurable default |
ASK_GOPBREFERENCE() |
Getter for GOPBREFERENCE w/ exceptions if field has no value |
HAS_GOPBREFERENCE() |
Determine if GOPBREFERENCE has a value |
GopClosedCadence¶
Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_GOPCLOSEDCADENCE() |
Getter for GOPCLOSEDCADENCE, with configurable default |
ASK_GOPCLOSEDCADENCE() |
Getter for GOPCLOSEDCADENCE w/ exceptions if field has no va |
HAS_GOPCLOSEDCADENCE() |
Determine if GOPCLOSEDCADENCE has a value |
GopNumBFrames¶
Number of B-frames between reference frames.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_GOPNUMBFRAMES() |
Getter for GOPNUMBFRAMES, with configurable default |
ASK_GOPNUMBFRAMES() |
Getter for GOPNUMBFRAMES w/ exceptions if field has no value |
HAS_GOPNUMBFRAMES() |
Determine if GOPNUMBFRAMES has a value |
GopSize¶
GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits. If gopSizeUnits is frames, gopSize must be an integer and must be greater than or equal to 1. If gopSizeUnits is seconds, gopSize must be greater than 0, but need not be an integer.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_GOPSIZE() |
Getter for GOPSIZE, with configurable default |
ASK_GOPSIZE() |
Getter for GOPSIZE w/ exceptions if field has no value |
STR_GOPSIZE() |
String format for GOPSIZE, with configurable default |
HAS_GOPSIZE() |
Determine if GOPSIZE has a value |
GopSizeUnits¶
Indicates if the gopSize is specified in frames or seconds. If seconds the system will convert the gopSize into a frame count at run time.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_GOPSIZEUNITS() |
Getter for GOPSIZEUNITS, with configurable default |
ASK_GOPSIZEUNITS() |
Getter for GOPSIZEUNITS w/ exceptions if field has no value |
HAS_GOPSIZEUNITS() |
Determine if GOPSIZEUNITS has a value |
Level¶
H.264 Level.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_LEVEL() |
Getter for LEVEL, with configurable default |
ASK_LEVEL() |
Getter for LEVEL w/ exceptions if field has no value |
HAS_LEVEL() |
Determine if LEVEL has a value |
LookAheadRateControl¶
Amount of lookahead. A value of low can decrease latency and memory usage, while high can produce better quality for certain content.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_LOOKAHEADRATECONTROL() |
Getter for LOOKAHEADRATECONTROL, with configurable default |
ASK_LOOKAHEADRATECONTROL() |
Getter for LOOKAHEADRATECONTROL w/ exceptions if field has n |
HAS_LOOKAHEADRATECONTROL() |
Determine if LOOKAHEADRATECONTROL has a value |
MaxBitrate¶
For QVBR: See the tooltip for Quality level
For VBR: Set the maximum bitrate in order to accommodate expected spikes in the complexity of the video.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_MAXBITRATE() |
Getter for MAXBITRATE, with configurable default |
ASK_MAXBITRATE() |
Getter for MAXBITRATE w/ exceptions if field has no value |
HAS_MAXBITRATE() |
Determine if MAXBITRATE has a value |
MinIInterval¶
Only meaningful if sceneChangeDetect is set to enabled. Defaults to 5 if multiplex rate control is used. Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_MINIINTERVAL() |
Getter for MINIINTERVAL, with configurable default |
ASK_MINIINTERVAL() |
Getter for MINIINTERVAL w/ exceptions if field has no value |
HAS_MINIINTERVAL() |
Determine if MINIINTERVAL has a value |
NumRefFrames¶
Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_NUMREFFRAMES() |
Getter for NUMREFFRAMES, with configurable default |
ASK_NUMREFFRAMES() |
Getter for NUMREFFRAMES w/ exceptions if field has no value |
HAS_NUMREFFRAMES() |
Determine if NUMREFFRAMES has a value |
ParControl¶
This field indicates how the output pixel aspect ratio is specified. If "specified" is selected then the output video pixel aspect ratio is determined by parNumerator and parDenominator, else if "initializeFromSource" is selected then the output pixsel aspect ratio will be set equal to the input video pixel aspect ratio of the first input.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_PARCONTROL() |
Getter for PARCONTROL, with configurable default |
ASK_PARCONTROL() |
Getter for PARCONTROL w/ exceptions if field has no value |
HAS_PARCONTROL() |
Determine if PARCONTROL has a value |
ParDenominator¶
Pixel Aspect Ratio denominator.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_PARDENOMINATOR() |
Getter for PARDENOMINATOR, with configurable default |
ASK_PARDENOMINATOR() |
Getter for PARDENOMINATOR w/ exceptions if field has no valu |
HAS_PARDENOMINATOR() |
Determine if PARDENOMINATOR has a value |
ParNumerator¶
Pixel Aspect Ratio numerator.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_PARNUMERATOR() |
Getter for PARNUMERATOR, with configurable default |
ASK_PARNUMERATOR() |
Getter for PARNUMERATOR w/ exceptions if field has no value |
HAS_PARNUMERATOR() |
Determine if PARNUMERATOR has a value |
Profile¶
H.264 Profile.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_PROFILE() |
Getter for PROFILE, with configurable default |
ASK_PROFILE() |
Getter for PROFILE w/ exceptions if field has no value |
HAS_PROFILE() |
Determine if PROFILE has a value |
QualityLevel¶
Leave as STANDARD_QUALITY or choose a different value (which might result in additional costs to run the channel). - ENHANCED_QUALITY: Produces a slightly better video quality without an increase in the bitrate. Has an effect only when the Rate control mode is QVBR or CBR. If this channel is in a MediaLive multiplex, the value must be ENHANCED_QUALITY. - STANDARD_QUALITY: Valid for any Rate control mode.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_QUALITYLEVEL() |
Getter for QUALITYLEVEL, with configurable default |
ASK_QUALITYLEVEL() |
Getter for QUALITYLEVEL w/ exceptions if field has no value |
HAS_QUALITYLEVEL() |
Determine if QUALITYLEVEL has a value |
QvbrQualityLevel¶
Controls the target quality for the video encode. Applies only when the rate control mode is QVBR. You can set a target quality or you can let MediaLive determine the best quality. To set a target quality, enter values in the QVBR quality level field and the Max bitrate field. Enter values that suit your most important viewing devices. Recommended values are: - Primary screen: Quality level: 8 to 10. Max bitrate: 4M - PC or tablet: Quality level: 7. Max bitrate: 1.5M to 3M - Smartphone: Quality level: 6. Max bitrate: 1M to 1.5M To let MediaLive decide, leave the QVBR quality level field empty, and in Max bitrate enter the maximum rate you want in the video. For more information, see the section called "Video - rate control mode" in the MediaLive user guide
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_QVBRQUALITYLEVEL() |
Getter for QVBRQUALITYLEVEL, with configurable default |
ASK_QVBRQUALITYLEVEL() |
Getter for QVBRQUALITYLEVEL w/ exceptions if field has no va |
HAS_QVBRQUALITYLEVEL() |
Determine if QVBRQUALITYLEVEL has a value |
RateControlMode¶
Rate control mode.
QVBR: Quality will match the specified quality level except when it is constrained by the maximum bitrate. Recommended if you or your viewers pay for bandwidth.
VBR: Quality and bitrate vary, depending on the video complexity. Recommended instead of QVBR if you want to maintain a specific average bitrate over the duration of the channel.
CBR: Quality varies, depending on the video complexity. Recommended only if you distribute your assets to devices that cannot handle variable bitrates.
Multiplex: This rate control mode is only supported (and is required) when the video is being delivered to a MediaLive Multiplex in which case the rate control configuration is controlled by the properties within the Multiplex Program.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_RATECONTROLMODE() |
Getter for RATECONTROLMODE, with configurable default |
ASK_RATECONTROLMODE() |
Getter for RATECONTROLMODE w/ exceptions if field has no val |
HAS_RATECONTROLMODE() |
Determine if RATECONTROLMODE has a value |
ScanType¶
Sets the scan type of the output to progressive or top-field-first interlaced.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_SCANTYPE() |
Getter for SCANTYPE, with configurable default |
ASK_SCANTYPE() |
Getter for SCANTYPE w/ exceptions if field has no value |
HAS_SCANTYPE() |
Determine if SCANTYPE has a value |
SceneChangeDetect¶
Scene change detection.
- On: inserts I-frames when scene change is detected.
- Off: does not force an I-frame when scene change is detected.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_SCENECHANGEDETECT() |
Getter for SCENECHANGEDETECT, with configurable default |
ASK_SCENECHANGEDETECT() |
Getter for SCENECHANGEDETECT w/ exceptions if field has no v |
HAS_SCENECHANGEDETECT() |
Determine if SCENECHANGEDETECT has a value |
Slices¶
Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures. This field is optional; when no value is specified the encoder will choose the number of slices based on encode resolution.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_SLICES() |
Getter for SLICES, with configurable default |
ASK_SLICES() |
Getter for SLICES w/ exceptions if field has no value |
HAS_SLICES() |
Determine if SLICES has a value |
Softness¶
Softness. Selects quantizer matrix, larger values reduce high-frequency content in the encoded image. If not set to zero, must be greater than 15.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_SOFTNESS() |
Getter for SOFTNESS, with configurable default |
ASK_SOFTNESS() |
Getter for SOFTNESS w/ exceptions if field has no value |
HAS_SOFTNESS() |
Determine if SOFTNESS has a value |
SpatialAq¶
Spatial AQ makes adjustments within each frame based on spatial variation of content complexity. The value to enter in this field depends on the value in the Adaptive quantization field. For more information, see the topic about video adaptive quantization in the MediaLive user guide.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_SPATIALAQ() |
Getter for SPATIALAQ, with configurable default |
ASK_SPATIALAQ() |
Getter for SPATIALAQ w/ exceptions if field has no value |
HAS_SPATIALAQ() |
Determine if SPATIALAQ has a value |
SubgopLength¶
If set to fixed, use gopNumBFrames B-frames per sub-GOP. If set to dynamic, optimize the number of B-frames used for each sub-GOP to improve visual quality.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_SUBGOPLENGTH() |
Getter for SUBGOPLENGTH, with configurable default |
ASK_SUBGOPLENGTH() |
Getter for SUBGOPLENGTH w/ exceptions if field has no value |
HAS_SUBGOPLENGTH() |
Determine if SUBGOPLENGTH has a value |
Syntax¶
Produces a bitstream compliant with SMPTE RP-2027.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_SYNTAX() |
Getter for SYNTAX, with configurable default |
ASK_SYNTAX() |
Getter for SYNTAX w/ exceptions if field has no value |
HAS_SYNTAX() |
Determine if SYNTAX has a value |
TemporalAq¶
Temporal makes adjustments within each frame based on variations in content complexity over time. The value to enter in this field depends on the value in the Adaptive quantization field. For more information, see the topic about video adaptive quantization in the MediaLive user guide.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_TEMPORALAQ() |
Getter for TEMPORALAQ, with configurable default |
ASK_TEMPORALAQ() |
Getter for TEMPORALAQ w/ exceptions if field has no value |
HAS_TEMPORALAQ() |
Determine if TEMPORALAQ has a value |
TimecodeInsertion¶
Determines how timecodes should be inserted into the video elementary stream. - 'disabled': Do not include timecodes - 'picTimingSei': Pass through picture timing SEI messages from the source specified in Timecode Config
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_TIMECODEINSERTION() |
Getter for TIMECODEINSERTION, with configurable default |
ASK_TIMECODEINSERTION() |
Getter for TIMECODEINSERTION w/ exceptions if field has no v |
HAS_TIMECODEINSERTION() |
Determine if TIMECODEINSERTION has a value |
TimecodeBurninSettings¶
Timecode burn-in settings
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_TIMECODEBURNINSETTINGS() |
Getter for TIMECODEBURNINSETTINGS |
MinQp¶
Sets the minimum QP. If you aren't familiar with quantization adjustment, leave the field empty. MediaLive will apply an appropriate value.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_MINQP() |
Getter for MINQP, with configurable default |
ASK_MINQP() |
Getter for MINQP w/ exceptions if field has no value |
HAS_MINQP() |
Determine if MINQP has a value |
MinBitrate¶
Used for QVBR rate control mode only. Optional. Enter a minimum bitrate if you want to keep the output bitrate about a threshold, in order to prevent the downstream system from de-allocating network bandwidth for this output.
Accessible with the following methods¶
| Method | Description |
|---|---|
GET_MINBITRATE() |
Getter for MINBITRATE, with configurable default |
ASK_MINBITRATE() |
Getter for MINBITRATE w/ exceptions if field has no value |
HAS_MINBITRATE() |
Determine if MINBITRATE has a value |