# Including SCTE-35 information in your HLS manifest
<a name="including-scte-35-information-in-your-hls-manifest"></a>

For outputs in an HLS package, you can have the service include information in the HLS manifest about the SCTE-35 markers that are in each of the outputs.

**To include SCTE-35 information in your HLS manifest (console)**

1. Open the MediaConvert console at [https://console.aws.amazon.com/mediaconvert](https://console.aws.amazon.com/mediaconvert).

1. Choose **Create new job**.

1. Set up your input, output groups, and outputs for video and audio, following the procedure in [Configuring SCTE-35 passthrough](passing-through-scte-35-markers.md) or [Inserting SCTE-35 with ESAM](specifying-scte-35-markers-using-esam-xml.md).

1. Enable ad markers in each of your **Apple HLS** output groups.

   1. In the **Job** pane on the left, under **Output groups**, choose **Apple HLS**.

   1. In the **Apple HLS group settings** section, choose **Advanced**.

   1. Choose **Container settings**, then scroll down to find the **PID controls** section.

   1. In the **Ad markers** section, choose one or both of **Elemental** and **SCTE-35 enhanced**. 

      For sample manifests created with each setting selected, see [Sample manifest: Elemental ad markers](sample-manifest-elemental-ad-markers.md) and [Sample manifest: SCTE-35 enhanced ad markers](sample-manifest-scte-35-enhanced-ad-markers.md).

1. If the source of your ad markers is an ESAM document, set these additional settings:

   1. Make sure that you entered XML for **Manifest confirm condition notification XML** during the procedure in [Specifying SCTE-35 markers using ESAM XML](specifying-scte-35-markers-using-esam-xml.md).

      When you want SCTE-35 markers in the output transport stream as well as in the manifest, use `dataPassThrough` attributes set to `"true"`. When you don't want markers in the transport stream, don't include `dataPassThrough` attributes.

   1. For each output in each of your Apple HLS output groups, set **SCTE-35 source** to **Passthrough**.

      1. In the **Job** pane on the left, under **Output groups**, **Apple HLS**, choose an output.

      1. In the **Output settings** section, choose **Transport stream settings**.

      1. For **SCTE-35 source**, choose **Passthrough**.