Updating NDI configuration - AWS Elemental MediaConnect
PrerequisitesProcedure

Updating NDI configuration

Updating the flow NDI® configuration allows you to determine how this flow communicates with the rest of your NDI environment.

Important

The NDI configuration is available only for Large flows.

Prerequisites

  • The following procedure assumes that you’ve already created a Largeflow.

Procedure

To update the NDI configuration of an existing flow (console)

  1. Open the MediaConnect console at https://console.aws.amazon.com/mediaconnect/.

  2. On the Flows page, choose the name of the flow that you want to update.

    The details page for that flow appears.

  3. In the NDI configuration section, choose Edit.

  4. Set Flow NDI support to Enabled to enable NDI, or Disabled to disable NDI.

  5. Enter or update the NDI machine name.

    • This name is used as a prefix to help you identify this flow source as an NDI receiver in your network. For example, if you enter MACHINENAME, your flow source will appear to your NDI senders as MACHINENAME (ProgramName).

    • If you don’t enter a name, MediaConnect generates a unique 12-character ID from the flow's ARN.

  6. Update the NDI discovery servers. You can add up to three discovery servers. For each discovery server, provide the following information:

    • Enter the discovery server IP address (IPv4 format).

    • Specify a port number if you’re not using the default (5959).

    • Select the appropriate VPC interface adapter.

  7. Choose Update.