Doc AWS SDK 예제 GitHub 리포지토리에서 더 많은 SDK 예제를 사용할 수 있습니다. [AWS](https://github.com/awsdocs/aws-doc-sdk-examples) 

기계 번역으로 제공되는 번역입니다. 제공된 번역과 원본 영어의 내용이 상충하는 경우에는 영어 버전이 우선합니다.

# SDK for SAP ABAP를 사용한 Amazon Pinpoint SMS 및 음성 API 예제
<a name="sap-abap_1_pinpoint-sms-voice_code_examples"></a>

다음 코드 예제에서는 Amazon Pinpoint SMS 및 음성 API와 함께 AWS SDK for SAP ABAP를 사용하여 작업을 수행하고 일반적인 시나리오를 구현하는 방법을 보여줍니다.

*작업*은 대규모 프로그램에서 발췌한 코드이며 컨텍스트에 맞춰 실행해야 합니다. 작업은 개별 서비스 함수를 직접적으로 호출하는 방법을 보여주며 관련 시나리오의 컨텍스트에 맞는 작업을 볼 수 있습니다.

각 예시에는 전체 소스 코드에 대한 링크가 포함되어 있으며, 여기에서 컨텍스트에 맞춰 코드를 설정하고 실행하는 방법에 대한 지침을 찾을 수 있습니다.

**Topics**
+ [작업](#actions)

## 작업
<a name="actions"></a>

### `CreateConfigurationSet`
<a name="pinpoint-sms-voice_CreateConfigurationSet_sap-abap_1_topic"></a>

다음 코드 예시는 `CreateConfigurationSet`의 사용 방법을 보여 줍니다.

**SDK for SAP ABAP API**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/sap-abap/services/pps#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
    TRY.
        " Create a new configuration set
        lo_pps->createconfigurationset(
          iv_configurationsetname = iv_configuration_set_name    " e.g., 'my-config-set'
        ).

        MESSAGE 'Configuration set created successfully.' TYPE 'I'.

      CATCH /aws1/cx_ppsalreadyexistsex INTO DATA(lo_already_exists_ex).
        MESSAGE lo_already_exists_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_already_exists_ex.
      CATCH /aws1/cx_ppsbadrequestex INTO DATA(lo_bad_request_ex).
        MESSAGE lo_bad_request_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_bad_request_ex.
      CATCH /aws1/cx_ppsinternalsvcerrorex INTO DATA(lo_internal_error_ex).
        MESSAGE lo_internal_error_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_internal_error_ex.
      CATCH /aws1/cx_ppslimitexceededex INTO DATA(lo_limit_exceeded_ex).
        MESSAGE lo_limit_exceeded_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_limit_exceeded_ex.
      CATCH /aws1/cx_ppstoomanyrequestsex INTO DATA(lo_too_many_requests_ex).
        MESSAGE lo_too_many_requests_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_too_many_requests_ex.
    ENDTRY.
```
+  API 세부 정보는 SDK for SAP ABAP API 참조의 [CreateConfigurationSet](https://docs.aws.amazon.com/sdk-for-sap-abap/v1/api/latest/index.html)를 참조하세요. *AWS * 

### `CreateConfigurationSetEventDestination`
<a name="pinpoint-sms-voice_CreateConfigurationSetEventDestination_sap-abap_1_topic"></a>

다음 코드 예시는 `CreateConfigurationSetEventDestination`의 사용 방법을 보여 줍니다.

**SDK for SAP ABAP API**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/sap-abap/services/pps#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
    TRY.
        " Create event destination for the configuration set
        lo_pps->createconfseteventdst(
          iv_configurationsetname = iv_configuration_set_name    " e.g., 'my-config-set'
          iv_eventdestinationname = iv_event_destination_name    " e.g., 'my-event-dest'
          io_eventdestination = io_event_destination
        ).

        MESSAGE 'Event destination created successfully.' TYPE 'I'.

      CATCH /aws1/cx_ppsalreadyexistsex INTO DATA(lo_already_exists_ex).
        MESSAGE lo_already_exists_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_already_exists_ex.
      CATCH /aws1/cx_ppsnotfoundexception INTO DATA(lo_not_found_ex).
        MESSAGE lo_not_found_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_not_found_ex.
      CATCH /aws1/cx_ppsbadrequestex INTO DATA(lo_bad_request_ex).
        MESSAGE lo_bad_request_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_bad_request_ex.
      CATCH /aws1/cx_ppsinternalsvcerrorex INTO DATA(lo_internal_error_ex).
        MESSAGE lo_internal_error_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_internal_error_ex.
      CATCH /aws1/cx_ppslimitexceededex INTO DATA(lo_limit_exceeded_ex).
        MESSAGE lo_limit_exceeded_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_limit_exceeded_ex.
      CATCH /aws1/cx_ppstoomanyrequestsex INTO DATA(lo_too_many_requests_ex).
        MESSAGE lo_too_many_requests_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_too_many_requests_ex.
    ENDTRY.
```
+  API 세부 정보는 SDK for SAP ABAP API 참조의 [CreateConfigurationSetEventDestination](https://docs.aws.amazon.com/sdk-for-sap-abap/v1/api/latest/index.html)을 참조하세요. *AWS * 

### `DeleteConfigurationSet`
<a name="pinpoint-sms-voice_DeleteConfigurationSet_sap-abap_1_topic"></a>

다음 코드 예시는 `DeleteConfigurationSet`의 사용 방법을 보여 줍니다.

**SDK for SAP ABAP API**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/sap-abap/services/pps#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
    TRY.
        " Delete the configuration set
        lo_pps->deleteconfigurationset(
          iv_configurationsetname = iv_configuration_set_name    " e.g., 'my-config-set'
        ).

        MESSAGE 'Configuration set deleted successfully.' TYPE 'I'.

      CATCH /aws1/cx_ppsnotfoundexception INTO DATA(lo_not_found_ex).
        MESSAGE lo_not_found_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_not_found_ex.
      CATCH /aws1/cx_ppsbadrequestex INTO DATA(lo_bad_request_ex).
        MESSAGE lo_bad_request_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_bad_request_ex.
      CATCH /aws1/cx_ppsinternalsvcerrorex INTO DATA(lo_internal_error_ex).
        MESSAGE lo_internal_error_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_internal_error_ex.
      CATCH /aws1/cx_ppstoomanyrequestsex INTO DATA(lo_too_many_requests_ex).
        MESSAGE lo_too_many_requests_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_too_many_requests_ex.
    ENDTRY.
```
+  API 세부 정보는 *AWS SDK for SAP ABAP API 참조*의 [DeleteConfigurationSet](https://docs.aws.amazon.com/sdk-for-sap-abap/v1/api/latest/index.html)를 참조하세요.

### `DeleteConfigurationSetEventDestination`
<a name="pinpoint-sms-voice_DeleteConfigurationSetEventDestination_sap-abap_1_topic"></a>

다음 코드 예시는 `DeleteConfigurationSetEventDestination`의 사용 방법을 보여 줍니다.

**SDK for SAP ABAP API**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/sap-abap/services/pps#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
    TRY.
        " Delete the event destination
        lo_pps->deleteconfseteventdst(
          iv_configurationsetname = iv_configuration_set_name    " e.g., 'my-config-set'
          iv_eventdestinationname = iv_event_destination_name    " e.g., 'my-event-dest'
        ).

        MESSAGE 'Event destination deleted successfully.' TYPE 'I'.

      CATCH /aws1/cx_ppsnotfoundexception INTO DATA(lo_not_found_ex).
        MESSAGE lo_not_found_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_not_found_ex.
      CATCH /aws1/cx_ppsbadrequestex INTO DATA(lo_bad_request_ex).
        MESSAGE lo_bad_request_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_bad_request_ex.
      CATCH /aws1/cx_ppsinternalsvcerrorex INTO DATA(lo_internal_error_ex).
        MESSAGE lo_internal_error_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_internal_error_ex.
      CATCH /aws1/cx_ppstoomanyrequestsex INTO DATA(lo_too_many_requests_ex).
        MESSAGE lo_too_many_requests_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_too_many_requests_ex.
    ENDTRY.
```
+  API 세부 정보는 SDK for SAP ABAP API 참조의 [DeleteConfigurationSetEventDestination](https://docs.aws.amazon.com/sdk-for-sap-abap/v1/api/latest/index.html)을 참조하세요. *AWS * 

### `GetConfigurationSetEventDestinations`
<a name="pinpoint-sms-voice_GetConfigurationSetEventDestinations_sap-abap_1_topic"></a>

다음 코드 예시는 `GetConfigurationSetEventDestinations`의 사용 방법을 보여 줍니다.

**SDK for SAP ABAP API**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/sap-abap/services/pps#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
    TRY.
        " Get event destinations for the configuration set
        oo_result = lo_pps->getconfseteventdestinations(
          iv_configurationsetname = iv_configuration_set_name    " e.g., 'my-config-set'
        ).

        " Process the event destinations
        LOOP AT oo_result->get_eventdestinations( ) INTO DATA(lo_event_dest).
          DATA(lv_dest_name) = lo_event_dest->get_name( ).
          DATA(lv_enabled) = lo_event_dest->get_enabled( ).

          MESSAGE |Event destination: { lv_dest_name }, Enabled: { lv_enabled }| TYPE 'I'.

          " Check for CloudWatch Logs destination
          DATA(lo_cloudwatch_dest) = lo_event_dest->get_cloudwatchlogsdst( ).
          IF lo_cloudwatch_dest IS NOT INITIAL.
            DATA(lv_log_group_arn) = lo_cloudwatch_dest->get_loggrouparn( ).
            MESSAGE |  CloudWatch Logs destination: { lv_log_group_arn }| TYPE 'I'.
          ENDIF.

          " Check for Kinesis Firehose destination
          DATA(lo_firehose_dest) = lo_event_dest->get_kinesisfirehosedst( ).
          IF lo_firehose_dest IS NOT INITIAL.
            DATA(lv_delivery_stream) = lo_firehose_dest->get_deliverystreamarn( ).
            MESSAGE |  Kinesis Firehose destination: { lv_delivery_stream }| TYPE 'I'.
          ENDIF.

          " Check for SNS destination
          DATA(lo_sns_dest) = lo_event_dest->get_snsdestination( ).
          IF lo_sns_dest IS NOT INITIAL.
            DATA(lv_topic_arn) = lo_sns_dest->get_topicarn( ).
            MESSAGE |  SNS destination: { lv_topic_arn }| TYPE 'I'.
          ENDIF.
        ENDLOOP.

      CATCH /aws1/cx_ppsnotfoundexception INTO DATA(lo_not_found_ex).
        MESSAGE lo_not_found_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_not_found_ex.
      CATCH /aws1/cx_ppsbadrequestex INTO DATA(lo_bad_request_ex).
        MESSAGE lo_bad_request_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_bad_request_ex.
      CATCH /aws1/cx_ppsinternalsvcerrorex INTO DATA(lo_internal_error_ex).
        MESSAGE lo_internal_error_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_internal_error_ex.
      CATCH /aws1/cx_ppstoomanyrequestsex INTO DATA(lo_too_many_requests_ex).
        MESSAGE lo_too_many_requests_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_too_many_requests_ex.
    ENDTRY.
```
+  API 세부 정보는 SDK for SAP ABAP API 참조의 [GetConfigurationSetEventDestinations](https://docs.aws.amazon.com/sdk-for-sap-abap/v1/api/latest/index.html)를 참조하세요. *AWS * 

### `ListConfigurationSets`
<a name="pinpoint-sms-voice_ListConfigurationSets_sap-abap_1_topic"></a>

다음 코드 예시는 `ListConfigurationSets`의 사용 방법을 보여 줍니다.

**SDK for SAP ABAP API**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/sap-abap/services/pps#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
    TRY.
        " List all configuration sets
        oo_result = lo_pps->listconfigurationsets(
          iv_nexttoken = iv_next_token    " Optional: Token for pagination
          iv_pagesize = iv_page_size      " Optional: Number of results per page, e.g., '10'
        ).

        " Process the configuration sets
        LOOP AT oo_result->get_configurationsets( ) INTO DATA(lo_config_set).
          DATA(lv_config_set_name) = lo_config_set->get_value( ).
          MESSAGE |Configuration set: { lv_config_set_name }| TYPE 'I'.
        ENDLOOP.

        " Check if there are more results
        DATA(lv_next_token) = oo_result->get_nexttoken( ).
        IF lv_next_token IS NOT INITIAL.
          MESSAGE |More results available. Next token: { lv_next_token }| TYPE 'I'.
        ENDIF.

      CATCH /aws1/cx_ppsbadrequestex INTO DATA(lo_bad_request_ex).
        MESSAGE lo_bad_request_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_bad_request_ex.
      CATCH /aws1/cx_ppsinternalsvcerrorex INTO DATA(lo_internal_error_ex).
        MESSAGE lo_internal_error_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_internal_error_ex.
      CATCH /aws1/cx_ppstoomanyrequestsex INTO DATA(lo_too_many_requests_ex).
        MESSAGE lo_too_many_requests_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_too_many_requests_ex.
    ENDTRY.
```
+  API 세부 정보는 SDK for SAP ABAP API 참조의 [ListConfigurationSets](https://docs.aws.amazon.com/sdk-for-sap-abap/v1/api/latest/index.html)를 참조하세요. *AWS * 

### `SendVoiceMessage`
<a name="pinpoint-sms-voice_SendVoiceMessage_sap-abap_1_topic"></a>

다음 코드 예시는 `SendVoiceMessage`의 사용 방법을 보여 줍니다.

**SDK for SAP ABAP API**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/sap-abap/services/pps#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
    TRY.
        " Create SSML message type object with voice parameters
        DATA(lo_ssml_message) = NEW /aws1/cl_ppsssmlmessagetype(
          iv_languagecode = iv_language_code    " e.g., 'en-US'
          iv_voiceid = iv_voice_id              " e.g., 'Matthew'
          iv_text = iv_ssml_message             " SSML formatted message text
        ).

        " Create voice message content with the SSML message
        DATA(lo_content) = NEW /aws1/cl_ppsvoicemessagecont(
          io_ssmlmessage = lo_ssml_message
        ).

        " Send the voice message
        DATA(lo_result) = lo_pps->sendvoicemessage(
          iv_originationphonenumber = iv_origination_number  " e.g., '+12065550110'
          iv_callerid = iv_caller_id                         " e.g., '+12065550199'
          iv_destinationphonenumber = iv_destination_number  " e.g., '+12065550142'
          io_content = lo_content
        ).

        " Retrieve the message ID from the response
        ov_message_id = lo_result->get_messageid( ).

        MESSAGE 'Voice message sent successfully.' TYPE 'I'.

      CATCH /aws1/cx_ppsbadrequestex INTO DATA(lo_bad_request_ex).
        MESSAGE lo_bad_request_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_bad_request_ex.
      CATCH /aws1/cx_ppsinternalsvcerrorex INTO DATA(lo_internal_error_ex).
        MESSAGE lo_internal_error_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_internal_error_ex.
      CATCH /aws1/cx_ppstoomanyrequestsex INTO DATA(lo_too_many_requests_ex).
        MESSAGE lo_too_many_requests_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_too_many_requests_ex.
    ENDTRY.
```
+  API 세부 정보는 SDK for SAP ABAP API 참조의 [SendVoiceMessage](https://docs.aws.amazon.com/sdk-for-sap-abap/v1/api/latest/index.html)를 참조하세요. *AWS * 

### `UpdateConfigurationSetEventDestination`
<a name="pinpoint-sms-voice_UpdateConfigurationSetEventDestination_sap-abap_1_topic"></a>

다음 코드 예시는 `UpdateConfigurationSetEventDestination`의 사용 방법을 보여 줍니다.

**SDK for SAP ABAP API**  
 GitHub에 더 많은 내용이 있습니다. [AWS 코드 예 리포지토리](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/sap-abap/services/pps#code-examples)에서 전체 예를 찾고 설정 및 실행하는 방법을 배워보세요.

```
    TRY.
        " Update the event destination
        lo_pps->updateconfseteventdst(
          iv_configurationsetname = iv_configuration_set_name    " e.g., 'my-config-set'
          iv_eventdestinationname = iv_event_destination_name    " e.g., 'my-event-dest'
          io_eventdestination = io_event_destination
        ).

        MESSAGE 'Event destination updated successfully.' TYPE 'I'.

      CATCH /aws1/cx_ppsnotfoundexception INTO DATA(lo_not_found_ex).
        MESSAGE lo_not_found_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_not_found_ex.
      CATCH /aws1/cx_ppsbadrequestex INTO DATA(lo_bad_request_ex).
        MESSAGE lo_bad_request_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_bad_request_ex.
      CATCH /aws1/cx_ppsinternalsvcerrorex INTO DATA(lo_internal_error_ex).
        MESSAGE lo_internal_error_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_internal_error_ex.
      CATCH /aws1/cx_ppstoomanyrequestsex INTO DATA(lo_too_many_requests_ex).
        MESSAGE lo_too_many_requests_ex->get_text( ) TYPE 'I'.
        RAISE EXCEPTION lo_too_many_requests_ex.
    ENDTRY.
```
+  API 세부 정보는 SDK for SAP ABAP API 참조의 [UpdateConfigurationSetEventDestination](https://docs.aws.amazon.com/sdk-for-sap-abap/v1/api/latest/index.html)을 참조하세요. *AWS *