# UDP/TS procedure
<a name="pass-through-or-removal-udp-ts"></a>

Passthrough is enabled or disabled individually for each output, which means it can be applied differently for different outputs in the same group.

**To enable passthrough**

1. In the Profile or Event screen, go to the Output Groups section at the bottom of the screen and display the tab for UDP/TS Output Group. 

1. In the output where you want to pass through SCTE-35 messages, open the PID Control section. Complete the following fields:
   + SCTE-35: Click to select.
   + SCTE-35 PID: Enter the ID of the PID where you want the SCTE-35 messages to go. 

**Result**  
All SCTE-35 messages from the input are included in the data stream of the relevant output.