# DeleteProtectConfiguration


Permanently delete the protect configuration. The protect configuration must have deletion protection disabled and must not be associated as the account default protect configuration or associated with a configuration set.

## Request Syntax


```
{
   "ProtectConfigurationId": "string"
}
```

## Request Parameters


For information about the parameters that are common to all actions, see [Common Parameters](CommonParameters.md).

The request accepts the following data in JSON format.

 ** [ProtectConfigurationId](#API_DeleteProtectConfiguration_RequestSyntax) **   <a name="pinpoint-DeleteProtectConfiguration-request-ProtectConfigurationId"></a>
The unique identifier for the protect configuration.  
Type: String  
Length Constraints: Minimum length of 1. Maximum length of 256.  
Pattern: `[A-Za-z0-9_:/-]+`   
Required: Yes

## Response Syntax


```
{
   "AccountDefault": boolean,
   "CreatedTimestamp": number,
   "DeletionProtectionEnabled": boolean,
   "ProtectConfigurationArn": "string",
   "ProtectConfigurationId": "string"
}
```

## Response Elements


If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

 ** [AccountDefault](#API_DeleteProtectConfiguration_ResponseSyntax) **   <a name="pinpoint-DeleteProtectConfiguration-response-AccountDefault"></a>
This is true if the protect configuration is set as your account default protect configuration.  
Type: Boolean

 ** [CreatedTimestamp](#API_DeleteProtectConfiguration_ResponseSyntax) **   <a name="pinpoint-DeleteProtectConfiguration-response-CreatedTimestamp"></a>
The time when the protect configuration was created, in [UNIX epoch time](https://www.epochconverter.com/) format.  
Type: Timestamp

 ** [DeletionProtectionEnabled](#API_DeleteProtectConfiguration_ResponseSyntax) **   <a name="pinpoint-DeleteProtectConfiguration-response-DeletionProtectionEnabled"></a>
The status of deletion protection for the protect configuration. When set to true deletion protection is enabled. By default this is set to false.   
Type: Boolean

 ** [ProtectConfigurationArn](#API_DeleteProtectConfiguration_ResponseSyntax) **   <a name="pinpoint-DeleteProtectConfiguration-response-ProtectConfigurationArn"></a>
The Amazon Resource Name (ARN) of the protect configuration.  
Type: String  
Length Constraints: Minimum length of 1. Maximum length of 256.  
Pattern: `arn:\S+` 

 ** [ProtectConfigurationId](#API_DeleteProtectConfiguration_ResponseSyntax) **   <a name="pinpoint-DeleteProtectConfiguration-response-ProtectConfigurationId"></a>
The unique identifier for the protect configuration.  
Type: String  
Length Constraints: Minimum length of 1. Maximum length of 64.  
Pattern: `[A-Za-z0-9_-]+` 

## Errors


For information about the errors that are common to all actions, see [Common Error Types](CommonErrors.md).

 ** AccessDeniedException **   
The request was denied because you don't have sufficient permissions to access the resource.    
 ** Reason **   
The reason for the exception.
HTTP Status Code: 400

 ** ConflictException **   
Your request has conflicting operations. This can occur if you're trying to perform more than one operation on the same resource at the same time or it could be that the requested action isn't valid for the current state or configuration of the resource.    
 ** Reason **   
The reason for the exception.  
 ** ResourceId **   
The unique identifier of the request.  
 ** ResourceType **   
The type of resource that caused the exception.
HTTP Status Code: 400

 ** InternalServerException **   
The API encountered an unexpected error and couldn't complete the request. You might be able to successfully issue the request again in the future.    
 ** RequestId **   
The unique identifier of the request.
HTTP Status Code: 500

 ** ResourceNotFoundException **   
A requested resource couldn't be found.    
 ** ResourceId **   
The unique identifier of the resource.  
 ** ResourceType **   
The type of resource that caused the exception.
HTTP Status Code: 400

 ** ThrottlingException **   
An error that occurred because too many requests were sent during a certain amount of time.  
HTTP Status Code: 400

 ** ValidationException **   
A validation exception for a field.    
 ** Fields **   
The field that failed validation.  
 ** Reason **   
The reason for the exception.
HTTP Status Code: 400

## See Also


For more information about using this API in one of the language-specific AWS SDKs, see the following:
+  [AWS Command Line Interface V2](https://docs.aws.amazon.com/goto/cli2/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for .NET V4](https://docs.aws.amazon.com/goto/DotNetSDKV4/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for C\$1\$1](https://docs.aws.amazon.com/goto/SdkForCpp/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for Go v2](https://docs.aws.amazon.com/goto/SdkForGoV2/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for Java V2](https://docs.aws.amazon.com/goto/SdkForJavaV2/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for JavaScript V3](https://docs.aws.amazon.com/goto/SdkForJavaScriptV3/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for Kotlin](https://docs.aws.amazon.com/goto/SdkForKotlin/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for PHP V3](https://docs.aws.amazon.com/goto/SdkForPHPV3/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for Python](https://docs.aws.amazon.com/goto/boto3/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration) 
+  [AWS SDK for Ruby V3](https://docs.aws.amazon.com/goto/SdkForRubyV3/pinpoint-sms-voice-v2-2022-03-31/DeleteProtectConfiguration)